Ridetech HQ Coil-Over System for 1963-1979 Corvette. 11530202

The Ridetech Coil-Over System for the C2 & C3 Corvette's includes everything you need to make your vintage Corvette handle like a new Corvette.  The package contains front upper and lower control arms, tall spindles, billet steering arms, inner & outer tie rods, front MuscleBar, rear trailing arms and 4 HQ Series Coil-Overs for every corner of your vehicle. Tubular Upper and Lower StrongArms feature Injection-molded Delrin bushings with 13% Teflon reduce deflection and stiction. Ball joint angles are corrected for the tall spindles and the positions altered to allow more caster while keeping the wheel centered in the wheel opening. The additional caster settings improve high-speed stability and steering feel. The lower arms feature a double sheer lower mount that has been lowered for increased suspension travel. TruTurn System includes tall spindles which induce more negative camber gain to maximize tire contact patch during cornering.  It also include billet aluminum steering arms, center link adapter, tie rods and adjusters to virtually eliminate bumpsteer, correct Ackerman angle and allow for wider tires.  HQ Series Coil-Overs utilize an impact forged aluminum body and Monotube design to deliver excellent ride quality and handling. They allow fine tuning of the ride quality and handling the rebound knob is located at the top of the shock for under hood access. They come standard with a 1,000,0001 Mile Warranty.   Front MucleBar Sway Bar helps reduce body roll and creates room for wider front tires. It includes the PosiLink end links that provide immediate engagement between the chassis and control arms.  Adjustable rate from 653 lbs/in to 805 lbs/in. Rear StrongArms are offset for increased tire clearance and are fabricated into a truss design for maximum strength and minimum weight. Also incorporated is the adjustable coil-over mount, locating them behind the axle for easy adjustments.  The strut rods are outfitting with R-Joint rod ends.