01-07 Toyota Sequoia / 00-06 Tundra 4.7L Coolant Recovery Tank
01-07 Toyota Sequoia / 00-06 Tundra 4.7L Coolant Recovery Tank
K2 Industries
Part #
K2-10754-TOY-006-CET
UPC #
OEM-RT-TO3014116
Couldn't load pickup availability
Product Description
Product Description
Coolant Recovery Tank — 01-07 Toyota Sequoia / 00-06 Tundra 4.7L
Direct replacement coolant expansion tank for Toyota's 4.7L V8 platform. Hard panel construction designed to handle your engine's thermal cycles. Bolt-in fit with factory mounting points — no modification required.
Key Features
- Factory-spec mounting — Aligns with OEM rocker points and bracket locations; no drilling or adapter fabrication
- Complete cap assembly — Pressure-rated cap and overflow hose routing included; ready to plumb
- Direct replacement design — Identical internal baffle structure and filler neck positioning as original
Specs
- Hard panel construction
- Factory mounting bracket compatible
- Complete with pressure cap and overflow routing
Whats Included
- Coolant recovery tank assembly
- Pressure-rated cap
- Overflow hose assembly
Frequently Asked Questions
Do I need new hoses or can I reuse the originals?
Reuse your existing hoses if they're in good condition — overflow routing matches OEM spec. If hoses are cracked, hardened, or weeping, swap them while the tank is out; you'll save yourself a repeat job later.
Will I need to drain the entire cooling system to install this?
You don't need a full system drain. Disconnect the overflow tube and radiator inlet line at the tank only, swap the unit, and reconnect. Top off coolant after install and bleed air as needed per your service manual.
Is the cap included, or will I need to transfer mine from the old tank?
Pressure-rated cap comes with this assembly — you're not transferring anything. Install as-is and you're done.
