1.00" to 1.25" 90 Degree Silicone Reducer Hose 3-Ply Black
1.00" to 1.25" 90 Degree Silicone Reducer Hose 3-Ply Black
K2 Industries
Part #
K2-1322-UNV-006-TSARK
UPC #
Couldn't load pickup availability
Product Description
Product Description
1.00" to 1.25" 90 Degree Silicone Reducer Hose — 3-Ply Black
High-temp silicone reducer hose with a 90-degree bend, stepping down from 1" to 1.25" diameter. Three-ply construction handles coolant, turbo, and intercooler applications without degradation. Black finish blends into most engine bays.
Key Features
- Reducer taper (1.00" to 1.25") - Bridges mismatched hose diameters without adapters or couplers
- 90-degree elbow configuration - Fits tight underhood spaces where straight runs won't work
- Silicone material - Resists oil, coolant, and high heat better than standard rubber
Specs
- Material: Silicone
- Configuration: 90-degree elbow reducer
- Inlet diameter: 1.00"
- Outlet diameter: 1.25"
- Ply construction: 3-ply reinforced
- Color: Black
What's Included
- 1x Silicone reducer hose
Frequently Asked Questions
Do I need clamps to install this hose?
Yes. Hose clamps are not included — you'll need two clamps (one for the 1.00" end, one for the 1.25" end) to secure it to your barbed fittings or ports. Worm-drive or constant-tension clamps work best.
Can this handle coolant loops, or is it turbo-only?
It's rated for both. Silicone handles coolant, turbo intake, intercooler discharge, and other high-temp fluid applications. Just match your actual hose temps to silicone's heat rating — verify your system won't exceed its limit before install.
Will this fit directly onto my existing barbed ports, or do I need to order adapters?
Test-fit first. If your ports are straight 1.00" and 1.25" barbed, this reducer connects them without additional fittings. If your ports use SAE or metric threads, you'll need barbed adapters — confirm port style before committing to this hose.
