1/2 Inch NBR Fuel Line Hose - 5 Foot Length
1/2 Inch NBR Fuel Line Hose - 5 Foot Length
K2 Industries
Part #
K2-6607-UNV-006-FC
UPC #
Couldn't load pickup availability
Product Description
Product Description
1/2 Inch NBR Fuel Line Hose — 5 Foot Length
Premium NBR rubber fuel line rated for direct fuel system use, supplied in a ready-to-install 5-foot section. Designed to handle fuel delivery without degradation, this hose resists ethanol blends and temperature cycling. Inner diameter matches OEM 1/2-inch fuel rail and carburetor fittings.
Key Features
- NBR (Nitrile) Material - Resists fuel swell and ethanol blends without cracking or softening over time.
- 1/2-Inch Inner Diameter - Direct fit for factory fuel rail and carburetor inlets; no adapter hassle.
- Pre-Cut 5-Foot Length - Eliminates measuring and cutting; ready to route and secure.
Specs
- Material: NBR Rubber
- Diameter: 1/2 Inch (inner)
- Length: 5 Feet
- Condition: New
What's Included
- 1x 5-Foot NBR Fuel Line Hose
Frequently Asked Questions
Do I need hose clamps to install this?
Yes — hose clamps are required at both ends but are not included. Standard worm-drive or spring clamps rated for fuel work will secure this hose to your fuel rail and carburetor inlet. Tighten snugly but do not over-clamp, which can pinch the hose.
Will this hose work with my fuel pump setup?
NBR fuel line handles both mechanical and electric fuel pump systems. If you're running higher fuel pressure (over 15 psi), confirm your pump's rated output beforehand — this hose is designed for standard carbureted and light EFI applications.
Can I shorten this hose or do I need the full 5 feet?
You can cut it to length with a sharp utility knife or hose cutter. Route the extra section cleanly and secure any loose hose with adhesive-backed clamps to avoid vibration. Always leave extra slack for engine movement.
