1.50" to 1.75" 90 Degree Silicone Reducer Hose 3-Ply Black/Red
1.50" to 1.75" 90 Degree Silicone Reducer Hose 3-Ply Black/Red
K2 Industries
Part #
K2-1406-UNV-006-TSARK
UPC #
Couldn't load pickup availability
Product Description
Product Description
1.50" to 1.75" 90 Degree Silicone Reducer Hose — 3-Ply Black/Red
Stepped silicone hose for radiator, heater, and coolant line transitions where diameters don't match. Three-ply construction handles heat and pressure cycles without cracking. The 90-degree bend puts connections exactly where you need them in tight engine bay spots.
Key Features
- 90-degree elbow design - Routes hoses around obstructions without kinks or dead-end runs
- 1.50" inlet to 1.75" outlet - Bridges the gap between different hose sizes on a single fitting
- Black with red stripe - Easy identification in engine bay and resists UV degradation
Specs
- Material: Silicone
- Configuration: 90-degree reducer elbow
- Inlet diameter: 1.50"
- Outlet diameter: 1.75"
- Ply construction: 3-ply
- Color: Black with red stripe
What's Included
- 1x silicone reducer hose (90-degree, 1.50" to 1.75")
Frequently Asked Questions
Will this hose work with standard hose clamps?
Yes — both ends accept standard worm-gear or band clamps. Clamp each diameter separately where the hose flares out, and you're set.
Can I use this for both coolant and heater hose applications?
Silicone handles both. It's rated for coolant systems and heater circuits without issue. Just make sure your system pressure stays within silicone's limits — if you're running a high-pressure custom setup, verify your specific application.
What prep or sealing do I need before installing?
No prep required — slide it on, position your clamps, and tighten. Some builders hit the connection points with a thin coat of silicone sealant for extra insurance, but it's optional depending on your cooling system design.
