2.00" 3-Ply Silicone Hose Straight Black
2.00" 3-Ply Silicone Hose Straight Black
K2 Industries
Part #
K2-1364-UNV-006-TSARK
UPC #
Couldn't load pickup availability
Product Description
Product Description
2.00" 3-Ply Silicone Hose Straight Black
High-temp silicone straight hose rated for coolant and boost lines. Three-ply construction handles pressure cycles without cracking or ballooning. Black finish resists UV and ozone degradation in engine bay environments.
Key Features
- 3-Ply silicone blend - Handles sustained heat and pressure without splitting or permanent deformation
- Straight configuration - Drop-in replacement for factory coolant and intercooler lines
- Black UV-resistant finish - Won't fade, crack, or harden under underhood heat
Specs
- Material: Silicone, 3-ply reinforced
- Diameter: 2.00"
- Configuration: Straight
- Color: Black
What's Included
- 1x 2.00" Straight Silicone Hose
Frequently Asked Questions
Will this hose work with my existing clamps?
Yes, the 2.00" diameter is a common OEM size. Your factory or aftermarket clamps should seat properly. Tighten gradually and check for leaks after the first heat cycle.
Can I use this on both coolant and boost lines?
Silicone hose handles both applications well. For boost lines, confirm your system pressure is within silicone's rating—most automotive applications sit safely in its range. For high-PSI forced induction, verify your specific setup.
Do I need to prep or seal the ends before installing?
The hose comes ready to install. No sealant or prep is required—just slide it onto your barbed fittings or factory ports and secure with clamps. Wipe the interior with a clean cloth before final assembly if debris is present.
