2.00" to 2.25" 45 Degree Silicone Reducer Hose 3-Ply Black
2.00" to 2.25" 45 Degree Silicone Reducer Hose 3-Ply Black
K2 Industries
Part #
K2-1337-UNV-006-TSARK
UPC #
Couldn't load pickup availability
Product Description
Product Description
2.00" to 2.25" 45 Degree Silicone Reducer Hose 3-Ply Black
Tapered silicone hose that steps down from 2.00" to 2.25" at a 45-degree angle, built with three reinforcement plies for durability. Black silicone construction handles coolant loops, intake runners, and boost lines without cracking or deteriorating. The 45-degree transition makes it ideal for tight engine bay layouts where straight adapters won't fit.
Key Features
- 45-Degree Angle Design - Routes hose around engine components without kinks or flow restriction
- Tapered Bore - Transitions smoothly from 2.00" to 2.25", reducing turbulence at the junction
- Three-Ply Silicone - Resists heat cycling, oil, and coolant degradation over time
Specs
- Material: Silicone
- Configuration: 45-degree reducer hose
- Bore: 2.00" inlet to 2.25" outlet
- Condition: New
- Reinforcement: 3-ply
Whats Included
- 1x 45-degree silicone reducer hose
Frequently Asked Questions
Do I need hose clamps?
Yes. This hose requires clamps at both the 2.00" and 2.25" ends to seal against your barbed fittings or ports. Clamps are not included — grab stainless steel worm-gear or spring clamps rated for the bore size.
Can I use this for a turbo boost line?
Silicone handles moderate boost pressures, but check your turbo's hose pressure rating first. If your system runs above 15 PSI continuously, verify the hose is rated for that duty. The 3-ply construction is solid for street applications.
Will this fit my current setup?
This hose steps from 2.00" to 2.25", so measure both connection points on your intake or cooling loop. If one port is 2.00" and the other is 2.25", you're set. If both are the same size, you'll need a straight coupler instead.
