2.25" 90 Degree Silicone Hose 3-Ply Black
2.25" 90 Degree Silicone Hose 3-Ply Black
K2 Industries
Part #
K2-1438-UNV-006-TSARK
UPC #
Couldn't load pickup availability
Product Description
Product Description
2.25" 90 Degree Silicone Hose — 3-Ply Black
Reinforced silicone bend for high-temp coolant and boost lines. Three-ply construction handles pressure spikes without cracking. Black finish resists UV and engine bay heat.
Key Features
- 90-degree angle — Direct routing without adapter stacking or custom bends
- 3-ply silicone construction — Handles sustained boost and coolant pressure without fatigue failure
- Black UV-resistant finish — Won't crack or fade under underhood exposure
Specs
- Material: Silicone
- Configuration: 90-degree elbow
- Diameter: 2.25"
- Construction: 3-ply reinforced
- Finish: Black
What's Included
- One 90-degree silicone hose elbow
Frequently Asked Questions
Will this work with my existing hose clamps?
This hose is sized at 2.25" inner diameter. Standard worm-gear or band clamps rated for that diameter will work — just make sure your clamps aren't corroded or damaged before reuse.
Can I use this on a turbo intake or coolant line?
Yes. 3-ply silicone handles both boost and coolant temps. For turbo applications, you may want to double-clamp each end if your system sees sustained peak pressure — consult your turbo kit's routing specs.
Does this need any prep before installation?
Inspect the inside and outside for debris or manufacturing dust, then wipe clean. Dry-fit it first to confirm your line runs without kinking. Once positioned, tighten clamps evenly and check for leaks after your first heat cycle.
