2.25" to 2.50" 45 Degree Silicone Reducer Hose - 3-Ply Black
2.25" to 2.50" 45 Degree Silicone Reducer Hose - 3-Ply Black
K2 Industries
Part #
K2-1428-UNV-006-TSARK
UPC #
Couldn't load pickup availability
Product Description
Product Description
2.25" to 2.50" 45 Degree Silicone Reducer Hose — 3-Ply Black
Stepped silicone hose that transitions from 2.25" down to 2.50" at a 45-degree angle. Three-ply construction withstands boost and coolant flow without collapsing. Black finish resists UV and oil degradation in engine bay conditions.
Key Features
- 45-Degree Angle - Directs flow smoothly through tight engine bay routing without sharp bends that cause turbulence.
- 3-Ply Silicone - Handles repeated thermal cycles and moderate pressure without splitting or leaking.
- Dual Diameter - Bridges the gap between 2.25" and 2.50" ports on intercoolers, radiators, and custom piping setups.
Specs
- Material: Silicone
- Configuration: 45-degree reducer
- Port sizes: 2.25" inlet to 2.50" outlet
- Construction: 3-ply reinforced
- Finish: Black
What's Included
- 1x 2.25" to 2.50" 45-degree silicone reducer hose
Frequently Asked Questions
Do I need hose clamps to install this?
Yes. This hose relies on clamps at both the 2.25" and 2.50" ends to create a sealed connection. Stainless steel clamps rated for silicone hose are recommended for engine bay use.
Can I use this on a coolant line or does it need to stay on boost piping only?
Silicone hose works on either. The 3-ply construction handles both coolant and forced induction applications. Verify your system's operating temperature and pressure stay within silicone limits before running it in extreme conditions.
What if my ports are slightly different sizes than 2.25" and 2.50"?
Silicone hose compresses over clamps, so minor undersizing (like 2.20" ports) can work with proper clamping. Oversizing won't seal. Measure your ports before ordering to confirm fit.
