2.50" Blue Silicone Hose - 3-Ply Straight
2.50" Blue Silicone Hose - 3-Ply Straight
K2 Industries
Part #
K2-1472-UNV-006-TSARK
UPC #
Couldn't load pickup availability
Product Description
Product Description
2.50" Blue Silicone Hose — 3-Ply Straight
High-temp silicone hose rated for coolant, boost, and vacuum lines. Built with three reinforced plies to handle pressure spikes without ballooning or cracking. The straight configuration works as a replacement or custom routing piece in most cooling and forced-induction setups.
Key Features
- 2.50" ID bore - Matches standard turbo and coolant line outlets without stepdown adapters
- Straight tube design - No bends; pairs with 90° and 45° elbows for custom routing
- Blue silicone material - Easy visibility of coolant level and flow; resists UV and ozone degradation
Specs
- Material: Silicone
- Configuration: Straight tube
- Interior diameter: 2.50"
- Reinforcement: 3-ply construction
Whats Included
- 2.50" Blue Silicone Hose — Straight section
Frequently Asked Questions
Do I need hose clamps, and what size should I use?
Hose clamps are not included. You'll need stainless steel clamps sized for 2.50" hose—typically T-bolt or worm-drive clamps in the 2.5–3" range. Tighten snugly but don't over-torque silicone.
Can I use this for both coolant and boost lines?
Yes. Three-ply silicone handles both coolant flow and turbo boost pressure. Just verify your system's maximum operating temperature stays within silicone's rated range and use appropriate clamps at both ends.
What about elbow fittings—are they sold separately?
This is a straight tube only. 90° and 45° elbows in the same 2.50" diameter are sold separately. Straight sections pair easily with elbows to build custom routing paths.
