2.75" 90 Degree Silicone Hose - 3-Ply Black
2.75" 90 Degree Silicone Hose - 3-Ply Black
K2 Industries
Part #
K2-1486-UNV-006-TSARK
UPC #
Couldn't load pickup availability
Product Description
Product Description
2.75" 90 Degree Silicone Hose — 3-Ply Black
High-temp silicone construction with three reinforcement plies handles boost, coolant, and vacuum lines. The 90-degree bend is pre-formed, so you're not fighting radius angles during install. Black exterior resists UV and engine bay heat without cracking.
Key Features
- 3-Ply Silicone Construction - Multiple reinforcement layers prevent bulging under pressure and extend hose life in high-heat applications.
- Pre-Bent 90-Degree Angle - No need to heat and form; drops into most tight engine bay spaces without guessing the radius.
- Temperature Rated - Silicone compound handles coolant, boost, and vacuum service without degradation.
Specs
- Material: Silicone
- Configuration: 90-degree elbow, single hose section
- Diameter: 2.75"
- Color: Black
- Reinforcement: 3-ply
What's Included
- One 2.75" 90-degree silicone hose
Frequently Asked Questions
What hose clamps do I need?
Clamps are not included with this hose. You'll need two hose clamps sized for 2.75" diameter — either worm drive or t-bolt style, depending on your install location and preference.
Can I use this for coolant and boost on the same build?
Yes. Silicone handles both high-temp coolant and positive boost pressure without breaking down. Just make sure your clamp torque is snug enough to prevent weeping at connection points.
Does this hose come pre-assembled or do I need to cut it?
This is a single pre-formed 90-degree section ready to install as-is. No cutting or additional bending required — measure your bay run and confirm the angle works for your layout before ordering.
