2" 90 Degree Silicone Hose - 3-Ply Red
2" 90 Degree Silicone Hose - 3-Ply Red
K2 Industries
Part #
K2-1363-UNV-006-TSARK
UPC #
Couldn't load pickup availability
Product Description
Product Description
2" 90 Degree Silicone Hose - 3-Ply Red
High-temp silicone bend designed to route coolant, intercooler lines, or custom plumbing around tight engine bays. The 90-degree angle eliminates fabrication—just cut to length and clamp. 3-ply construction handles boost and coolant systems without collapse.
Key Features
- 90-degree fixed angle - Eliminates the need to heat and custom-form standard straight hose
- 2" bore diameter - Matches common turbo inlet and coolant line sizes without reducers
- Red silicone, 3-ply - Resists oil, coolant, and underhood heat without hardening or splitting
Specs
- Material: Silicone with reinforcement
- Configuration: 90-degree elbow
- Bore: 2 inch
- Color: Red
- Ply rating: 3-ply
Whats Included
- One 2" 90-degree silicone hose
Frequently Asked Questions
Do I need clamps, and what size?
You'll need hose clamps on both ends—the hose itself does not include them. Standard worm-drive clamps sized for 2-inch hose work fine. Tighten until snug, then back off a quarter turn to avoid crushing the silicone.
Can this handle boost pressure or is it coolant-only?
This hose is rated for both. Use it on intercooler piping, turbo inlet, or coolant bypass lines. The 3-ply construction prevents ballooning under moderate boost. For max PSI limits, test your specific plumbing setup before high-boost tune.
What if the 90-degree angle doesn't quite fit my engine bay routing?
Cut the hose to a shorter length if you need a tighter bend radius, or use a length of straight silicone hose upstream or downstream to adjust the final plumbing path. The fixed angle itself cannot be re-shaped without heat.
