2" to 2.15" Flared 45 Degree Exhaust Pipe Bend Tubing Mild Steel
2" to 2.15" Flared 45 Degree Exhaust Pipe Bend Tubing Mild Steel
K2 Industries
Part #
K2-13563-UNV-006-EXH
UPC #
Couldn't load pickup availability
Product Description
Product Description
2" to 2.15" Flared 45 Degree Exhaust Pipe Bend Tubing — Mild Steel
Mandrel-bent mild steel exhaust tubing with precision 45-degree flare for custom fabrication and repair work. This tubing handles transitions between 2" and 2.15" diameters with smooth internal flow, eliminating turbulence at the joint. Mild steel construction accepts welding, bending, and painting without brittleness.
Key Features
- 45-Degree Flare - Creates smooth diameter transition without stepped edges or flow restriction.
- Mandrel Bent - Inner radius stays consistent; no kinks or collapse during installation or welding.
- Bare Mild Steel - Accepts TIG/MIG welding directly and takes primer and paint without surface prep complications.
Specs
- Material: Mild Steel
- Diameter Range: 2" to 2.15"
- Bend Angle: 45 Degrees
- Construction: Mandrel-Bent
What's Included
- 1x Exhaust Pipe Bend Tubing
Frequently Asked Questions
Can I weld this directly, or does it need surface prep?
Weld it as-is. Bare mild steel takes TIG and MIG without wire feed issues. Just clean the joint area before you strike an arc to keep your bead clean.
Do I need to paint this before or after installation?
Either works. Bare steel will start to surface rust if left exposed, so prime and paint it soon after welding. Paint after install if the finished position makes prep easier; prime it before if you want to move it around your shop first.
Will this bend or collapse if I try to reshape it?
Mandrel bending keeps the tube round inside, but mild steel is relatively soft—cold bending by hand will kink it. Use a proper exhaust bender or heat it and work slowly if you need to adjust the angle.
