2" to 2.15" Flared 90 Degree L-Bend Exhaust Pipe Tubing Stainless Steel
2" to 2.15" Flared 90 Degree L-Bend Exhaust Pipe Tubing Stainless Steel
K2 Industries
Part #
K2-13565-UNV-006-EXH
UPC #
Couldn't load pickup availability
Product Description
Product Description
2" to 2.15" Flared 90 Degree L-Bend Exhaust Pipe Tubing — Stainless Steel
Mandrel-bent stainless steel exhaust tube with precision flare and 90-degree angle for custom routing and turbo applications. Built from 304-grade stainless to resist corrosion and thermal stress. Flared ends accommodate slip-fit connections without additional adapters.
Key Features
- 2" to 2.15" flared ends - Allows clean slip-fit mating without couplers or reducers
- 90-degree L-bend configuration - Pre-angled for common turbo downpipe and intercooler routing
- Stainless steel construction - Handles high-temperature exhaust without rust or warping
Specs
- Material: Stainless Steel
- Tube diameter: 2" to 2.15" flared
- Bend angle: 90 degrees
- Configuration: Mandrel-bent L-bend tubing
Whats Included
- One L-bend exhaust pipe tube assembly
Frequently Asked Questions
Will this fit my turbo downpipe setup without adapters?
The 2" to 2.15" flare is designed for slip-fit connections. Test-fit before final install — some turbo kits use slightly different flare angles or diameters, so confirm your existing downpipe outlet matches this tube's inlet.
Do I need to weld this or can I clamp it?
Clamps work for lower-pressure sections, but high-temperature turbo exhaust typically needs full welds at the flanges for reliability. Have a shop verify your routing and weld method based on your specific boost pressure and application.
Can I paint or ceramic-coat this after install?
Yes — stainless takes ceramic coating and high-temp paint well. Clean with a degreaser first, let dry fully, then apply your coating per the product instructions. No primer needed on bare stainless.
