3.00" 90 Degree Silicone Hose 3-Ply Black/Red
3.00" 90 Degree Silicone Hose 3-Ply Black/Red
K2 Industries
Part #
K2-1388-UNV-006-TSARK
UPC #
Couldn't load pickup availability
Product Description
Product Description
3.00" 90 Degree Silicone Hose 3-Ply Black/Red
Premium silicone construction handles high-temp coolant and boost lines without cracking or degradation. The 3-ply reinforced design resists collapse under vacuum and pressure cycles. Black exterior with red inner layer makes routing visible and looks factory-clean in engine bays.
Key Features
- 90-Degree Mandrel Bend - Eliminates kinking and flow restriction at elbows where standard hose would collapse.
- 3-Ply Silicone Construction - Rated for sustained high temperature and pressure without hardening or splitting.
- Color-Coded Interior - Red inner layer aids identification during routing and makes connections obvious at a glance.
Specs
- Material: Silicone
- Configuration: 90-Degree Elbow
- Diameter: 3.00"
- Construction: 3-Ply Reinforced
What's Included
- Single 3.00" 90-Degree Silicone Hose
Frequently Asked Questions
Do I need clamps to install this hose?
Clamps are not included with this hose. You'll need to source spring clamps or worm-drive clamps that match your 3.00" barb diameter — most builders use stainless steel worm-drives to avoid corrosion.
Can this hose handle coolant loops and intercooler setups?
Silicone handles both. It's rated for continuous coolant circulation and boost pressure cycles without degradation, so it works for radiator feeds, heater lines, and turbo/supercharger applications.
Will this fit my existing hose routing without modification?
The 90-degree bend is fixed, so test-fit first. If your run needs a different angle or radius, you may need a straight section or multi-piece setup instead of this single elbow.
