3.00" to 3.50" 90 Degree Silicone Reducer Hose - 3-Ply Black/Red
3.00" to 3.50" 90 Degree Silicone Reducer Hose - 3-Ply Black/Red
K2 Industries
Part #
K2-1373-UNV-006-TSARK
UPC #
Couldn't load pickup availability
Product Description
Product Description
3.00" to 3.50" 90 Degree Silicone Reducer Hose — 3-Ply Black/Red
Angled silicone reducer hose steps down from 3-inch to 3.5-inch diameter with a 90-degree bend. Three-ply construction with black inner tube and red reinforcement layers handles boost, coolant, and vacuum lines under pressure. Flexible design fits tight engine bay routing without kinks or restrictions.
Key Features
- 90-degree elbow form - Eliminates need for separate fittings and adapter clusters in tight spaces
- Tapered diameter transition - Reduces turbulence when stepping down from larger to smaller line diameter
- Three-ply reinforcement - Handles sustained boost pressure and thermal cycling without collapse or ballooning
Specs
- Material: Silicone
- Configuration: 90-degree reducer, 3.00" inlet to 3.50" outlet
- Construction: 3-ply (black inner tube, red reinforcement layers)
- Condition: New
- Quantity: 1 piece
Whats Included
- 1x Silicone reducer hose (90-degree, 3.00" to 3.50")
Frequently Asked Questions
Do I need hose clamps to install this?
Hose clamps are required on both ends to seal the connection — they are not included. Standard worm-gear or T-bolt clamps sized for 3-inch and 3.5-inch hose will work.
Can I use this on a coolant line or does it only handle boost hoses?
This silicone construction handles coolant, boost, vacuum, and intercooler lines. Just verify the pressure rating matches your application — if your system runs above 20 psi sustained, confirm this hose's rated maximum before final install.
What prep or treatment is needed before installation?
Wipe both the hose ends and the barbed fittings with a lint-free cloth to remove any dust or debris. No primer, sealant, or special prep needed — the silicone seats directly onto the fitting.
