3-Ply Silicone 90 Degree Elbow Hose 1.25" - Blue
3-Ply Silicone 90 Degree Elbow Hose 1.25" - Blue
K2 Industries
Part #
K2-1404-UNV-006-TSARK
UPC #
Couldn't load pickup availability
Product Description
Product Description
3-Ply Silicone 90 Degree Elbow Hose 1.25" — Blue
Reinforced silicone elbow designed to handle high-temp coolant and intercooler lines without splitting or collapsing. The 3-ply construction and 90-degree geometry make this a direct swap for factory radiator hoses or custom cooling setups. Bends smoothly without kinking.
Key Features
- 3-Ply Silicone Wall - Resists collapse under boost and sustained heat cycles better than single-layer hose.
- 90-Degree Elbow Geometry - Eliminates the need for multiple connectors; routes coolant directly where you need it.
- 1.25" ID - Matches common radiator hose and intercooler outlet sizes without reducer fittings.
Specs
- Material: Silicone
- Configuration: 90-degree elbow
- Inside Diameter: 1.25"
- Condition: New
- Quantity: 1 piece
Whats Included
- 3-Ply Silicone 90 Degree Elbow Hose 1.25" — Blue
Frequently Asked Questions
Will this hose handle boost pressure or just coolant flow?
This is rated for coolant and water circulation in high-heat environments. If you're running it on a pressurized intercooler setup, confirm your system PSI matches silicone hose ratings — most handle 30+ PSI without issue, but verify your specific application before install.
Do I need hose clamps, and what size?
You'll need clamps to secure both ends of the elbow to your hose barb fittings or ports. Clamps are not included — grab stainless steel worm-gear clamps sized to match your 1.25" ID hose for reliable grip.
Can I use this straight out of the box, or does it need prep?
No prep needed. Silicone hose ships ready to install. If you're replacing an old hose, flush the cooling system or intercooler loop first to avoid debris blocking the new line.
