3-Ply Silicone Hose 2.00" x 8.00" Long Black/Red
3-Ply Silicone Hose 2.00" x 8.00" Long Black/Red
K2 Industries
Part #
K2-1357-UNV-006-TSARK
UPC #
Couldn't load pickup availability
Product Description
Product Description
3-Ply Silicone Hose 2.00" x 8.00" Long Black/Red
Reinforced silicone construction rated for coolant, vacuum, and turbo applications. Three-ply weave handles heat and pressure cycling without cracking or ballooning. Pre-cut to 8 inches—ready to splice into existing lines or custom routes.
Key Features
- 3-Ply Silicone Construction - Resists oil, coolant, and thermal cycling without hardening or splitting over time.
- Dual Color Design - Black exterior with red inner layer makes routing visible during install and easier to trace later.
- Pre-Cut Length - Eight inches eliminates guesswork for intercooler, bypass, or auxiliary coolant runs.
Specs
- Material: Silicone
- Inner Diameter: 2.00"
- Length: 8.00"
- Configuration: Single hose segment, black exterior / red interior
- Condition: New
What's Included
- 1x 3-Ply Silicone Hose (2.00" ID x 8.00" long)
Frequently Asked Questions
What hose clamps work with this diameter?
Standard automotive clamps sized for 2-inch hose will work. Stainless steel T-bolt clamps are your safest bet for pressure applications like turbo boost lines.
Can I use this for my radiator or heater bypass?
Yes. Three-ply silicone handles both low-pressure (vacuum) and moderate-pressure (coolant) applications. For high-pressure fuel lines, step up to a fuel-specific hose.
Do I need to seal or glue the connection points?
No adhesive needed—clamps do the work. Make sure hose ends slide fully onto barbed fittings, then tighten clamps in a cross pattern (like wheel lugs) to keep the seal even.
