4.00" 45 Degree Silicone Hose - 3-Ply Black
4.00" 45 Degree Silicone Hose - 3-Ply Black
K2 Industries
Part #
K2-1515-UNV-006-TSARK
UPC #
Couldn't load pickup availability
Product Description
Product Description
4.00" 45 Degree Silicone Hose — 3-Ply Black
High-temp silicone hose with a 45-degree bend for tight coolant and boost plumbing runs. Three-ply reinforced construction handles pressure spikes and thermal cycling without degradation. Black finish blends into engine bay while resisting UV and oil exposure.
Key Features
- 45-Degree Elbow Design - Eliminates the need for multiple hose segments and adapters in confined spaces.
- 3-Ply Construction - Withstands sustained high temperatures and pressure without cracking or weeping.
- Oil and UV Resistant - Silicone formulation resists degradation from engine heat, coolant additives, and sunlight exposure.
Specs
- Material: Silicone
- Configuration: 45-degree elbow
- Diameter: 4.00 inch
- Construction: 3-ply reinforced
- Finish: Black
Whats Included
- One 4.00" 45-degree silicone hose
Frequently Asked Questions
What hose clamps do I need for this?
Standard worm-gear or t-bolt clamps sized for 4.00" diameter hose will work. Most builders use clamps rated for hose sizes in the 3.5" to 4.5" range — verify clamp sizing against your hose before assembly.
Can I use this on a supercharger or turbo boost line?
Silicone hose is rated for high temperatures. Confirm maximum pressure rating for your specific application — some forced-induction setups demand reinforced braided lines instead. Check your turbo or blower manufacturer's hose specs.
Do I need to prep or seal the connections before installing?
No prep needed on the hose itself. Ensure clamp surfaces and hose barbs are clean and dry before tightening clamps. Tighten securely but do not overtighten — excessive force can distort the barb connection.
