4AN Oil Feed Line - 90 Degree Fittings Both Ends
4AN Oil Feed Line - 90 Degree Fittings Both Ends
K2 Industries
Part #
K2-1145-UNV-006-OLK
UPC #
Couldn't load pickup availability
Product Description
Product Description
4AN Oil Feed Line — 90 Degree Fittings Both Ends
Pre-assembled 4AN oil line with 90-degree fittings at each end, ready to route from turbo, supercharger, or remote filter block to your engine. Built for tight engine bay layouts where straight runs won't work. Hard-line construction with sealed fittings ensures no weeping under boost.
Key Features
- 90-Degree Ends - Eliminates need for separate adapter fittings; goes directly into tight spaces without crimping or kinking the line
- 4AN Specification - Sized for turbo feed, supercharger feed, or remote filter supply on small-displacement and mid-range boosted engines
- Pre-Assembled Configuration - Fittings arrive sealed and torqued; no wrench time on the bench before install
Specs
- Configuration: 4AN line with 90-degree fittings at both ends
- Condition: New, pre-assembled
Whats Included
- 4AN oil feed line with dual 90-degree fittings
Frequently Asked Questions
Do I need crush washers or any sealing hardware when I bolt this in?
The fittings come sealed and torqued from the factory. You'll need crush washers when you thread into your block, turbo, or filter block — grab a 4AN crush washer kit if you don't have them. Most guys already have these on hand.
Can I cut or re-fit the line if the length doesn't work for my layout?
This is a hard line with fittings already crimped on both ends. Length is fixed. If you need custom routing, you're better off buying bulk 4AN line and a fitting kit to assemble yourself. Measure twice before ordering.
What's the pressure rating on this line?
Pressure rating not specified in the product data. For turbo and supercharger feed lines on naturally aspirated or mildly boosted engines, 4AN is the standard. If you're running serious boost, verify the burst rating with the supplier before committing to this line.
