96-01 Chevrolet S10 Blazer GMC Sonoma Jimmy Exhaust Header Gasket
96-01 Chevrolet S10 Blazer GMC Sonoma Jimmy Exhaust Header Gasket
K2 Industries
Part #
K2-4597-CHV-006-TSARK
UPC #
Couldn't load pickup availability
Product Description
Product Description
Exhaust Header Gasket Set — 96–01 S10 Blazer / Sonoma / Jimmy
Seals the joint between your header and cylinder head to prevent exhaust leaks. These gaskets handle engine heat and vibration cycle after cycle. Proper sealing keeps exhaust where it belongs and prevents vacuum leaks that tank fuel economy.
Key Features
- Full set for both banks - Everything you need to seal both sides of the engine in one order.
- Heat-rated construction - Built to stay seated under sustained exhaust temperatures without degradation.
- Direct fit - Matches original gasket profile and bolt hole spacing exactly.
Specs
- Complete gasket set for header-to-head interface, both cylinders
- Hard panel construction
What's Included
- Gasket set (quantity and configuration per vehicle application)
Frequently Asked Questions
Do I need to prep or clean the mating surfaces before installation?
Yes. Scrape off the old gasket material completely from both the header flange and cylinder head. Use a gasket scraper or old credit card — avoid wire wheels that can score the surface. Wipe clean with a dry rag before setting the new gasket.
What hardware do I need to bolt this down?
The fasteners (bolts or studs) are not included with the gasket set. You'll use the existing header bolts from your current setup. If yours are stripped or corroded, source header bolts that match your original size and thread pitch.
How do I know if the gasket is seated correctly?
Start all bolts by hand first to center the gasket, then tighten in a crisscross pattern — don't tighten one side completely before moving to the other. Refer to your service manual for final torque spec. A properly seated gasket will sit flush with no gaps or wrinkles around the bolt holes.
