Hushmat Floor Deadening and Insulation Kit 581201

Name: Hushmat Floor Deadening and Insulation Kit 581201
Brand: HUSHMAT
SKU: HUSHMAT-581201
Price: 391.50 USD
Availability: InStock

HUSHMAT

Part #
HUSHMAT-581201
UPC #
00881101812019

$391.50 USD

~~$607.13 USD~~ $391.50 USD

Sale Sold out

Shipping calculated at checkout.

Product Description

The 911 Porsche was designed for exceptional handling and high speeds. There is no doubt this is a hallmark feature of the 911. However in order to accomplish this the vehicle was built low to the ground which increases the transfer of noise, road noise and vibrations through the floor pan. The HushMat floor kit treats the vehicle from the toe pan all the way back to the rear seat, waterfall area. HushMat?s lightweight and flexible technology forms easily to the ribs, and deep draw areas of the floor pan insulating 100 percent of this area. The floor is a major transfer point for noise and heat. HushMat dramatically improves the drive and ride quality experience in the 911. Best of all it performs and is hidden under the carpet and other interior panels.

Attributes

GTIN: 00881101812019
Brand Name: Hushmat
Cold Flexibility: Can be bent around 25 mm. mandrel at -30 degrees C with no cracking or loss of adhesion
Color: Polymer - Black; Backing - Silver
Flammability: Tested per FMVSS 302, HushMat Ultra is self-extinguishing and meets all aspects of the standard
Hardness: 6.5 - 9.0mm ?ASTM D-5
Peel Strength: Tested in 90 degree peel at a crosshead speed of 300mm per minute on a 25 mm wide test specimen. Average load in Newtons is reported.
R-Value: 7
Safety: HushMat Ultra is not considered a hazardous material. Care should be used in handling to avoid cuts from the foil. Gloves are recommended. The Material Safety Data Sheet is available upon request and should be read and understood before using this product.
Shelf Life: At least 6 months when stored at 40 degrees C or less
Specific Gravity: 1.47 (approx. 0.47 pounds per square foot)
Temperature Resistance: HUSHMAT ULTRA will withstand a bake of 1 hour at 240 degrees C with no deformation, sag, or flow when baked in horizontal, vertical or inverted positions.
Thickness: 1.5mm