Ford Ranger T6 & Mazda BT-50 3.2L Diesel Silicone Radiator Coolant Hose Kit 2012 - 2023 (3-Piece Set)

Upgrade the cooling system of your Ford Ranger T6 or Mazda BT-50 3.2L diesel with this premium 3-piece silicone radiator coolant hose kit, hand-crafted from multi-ply silicone and nylon-reinforced construction for superior heat resistance, pressure handling, and long-term durability. Factory rubber radiator hoses on these 3.2L diesel platforms are prone to age-related cracking, swelling, and bursting under sustained operating pressure — particularly on vehicles used for towing, off-road work, or extreme climate driving where coolant temperatures and pressures push factory hoses beyond their service limits. This silicone replacement kit delivers a permanent upgrade with bursting pressure of 245 PSI, temperature tolerance from -60°C to +260°C, and visual presentation that elevates the engine bay aesthetic while providing genuine functional reliability.

Features:

• Premium silicone & nylon-reinforced construction – multi-ply hand-crafted hoses deliver superior heat resistance, pressure handling, and long-term durability compared to factory rubber alternatives
• 3-ply 4.5mm wall thickness – overbuilt construction ensures structural strength and resistance to deformation under sustained cooling system pressure
• Direct factory replacement design – manufactured to exacting OE dimensional specifications for clean, modification-free installation
• Wide color selection – available in matte black, gloss black, blue, red, green, white, yellow, pink, purple, grey, and orange to match any engine bay aesthetic
• Extreme temperature tolerance – rated for -60°C (-76°F) to +260°C (+500°F) operation, far exceeding factory rubber hose limits
• High pressure handling – 245 PSI bursting pressure rating with 0.3-0.9 MPa working pressure range provides significant safety margin over factory specifications

Specifications:

• Condition: 100% Brand New
• Type: Radiator Coolant Hose Kit
• Material: Premium Silicone with Nylon Reinforcement
• Construction: 3-Ply (4.5mm) / 4-Ply (5.4mm) Multi-Ply
• Wall Thickness: 4.5mm (3-Ply Standard)
• Bursting Pressure: 245 PSI
• Working Pressure: 0.3 – 0.9 MPa
• Temperature Range: -60°C to +260°C (-76°F to +500°F)
• Size Tolerance: ±0.5 mm
• Quantity: 3 hoses per set
• Available Colors: Matte Black / Black / Blue / Red / Green / White / Yellow / Pink / Purple / Grey / Orange
• Position: Radiator Coolant System
• Purpose: Performance Upgrade / OE Replacement

OE / Replacement Part Numbers:

• HORP3213

Fitment:

• Ford Ranger T6 (SAFA / SAFB / SA2R chassis): 3.2L Diesel (2012 – 2023)
• Mazda BT-50 UP: 3.2L P5-AT Diesel (2012 – 2015)
• Mazda BT-50 UR: 3.2L P5-AT Diesel (2015 – 2019)
• Compatible with 3.2L 5-cylinder diesel engine variants only – not compatible with 2.2L diesel, 2.5L petrol, or other engine configurations
• Confirm vehicle model, chassis code, engine displacement, and engine code before ordering

Contents:

• 3x Silicone Radiator Coolant Hoses (Complete Set)

Benefits:

• Silicone construction permanently eliminates the cracking, swelling, and rupture failures common to aged rubber radiator hoses on high-mileage 3.2L Ranger and BT-50 platforms
• Higher pressure rating (245 PSI bursting pressure) provides significant safety margin for towing, off-road work, and extreme operating conditions where factory rubber hoses can fail catastrophically
• Wide temperature tolerance (-60°C to +260°C) maintains hose integrity in extreme cold starts, prolonged hot-climate driving, and sustained high-load operation
• Multi-ply nylon-reinforced construction prevents hose collapse under negative pressure during cool-down cycles – a common failure mode of aged single-ply rubber hoses
• Long-term durability eliminates the recurring expense and downtime of periodic radiator hose replacement service intervals
• Significant engine bay aesthetic upgrade – wide color selection allows engine bay theming to match your vehicle's exterior or build aesthetic
• Hand-crafted manufacturing with overbuilt construction specifications ensures consistent quality across every hose in the kit

Installation Notes:

• Allow the engine to fully cool and the cooling system to fully depressurize before beginning hose replacement to avoid scalding from hot coolant
• Drain the radiator coolant into a clean container before removing factory hoses – coolant can be reused if clean and within service life
• Inspect all hose clamps, radiator inlet/outlet connections, and the thermostat housing during installation – replace any aged or corroded clamps to ensure long-term leak-free operation
• Use stainless steel T-bolt or worm-drive clamps appropriate for silicone hose – silicone requires properly sized clamps to seal effectively
• Refill the cooling system with manufacturer-specified coolant type after installation – do not mix coolant types
• Bleed the cooling system thoroughly after installation to remove trapped air – follow factory bleed procedure for the 3.2L diesel cooling system
• Check for leaks after the engine reaches operating temperature and cycles through the thermostat opening – inspect all connections and re-tighten clamps if needed
• Installation instructions are not included with the kit – professional installation is recommended unless you are familiar with cooling system service procedures
• If unsure about compatibility with your specific Ranger or BT-50 variant, contact our team with your year, model, chassis code, and engine code before ordering

Warranty:

• 12-month standard warranty from date of purchase
• Contact our support team for assistance with any issues