Holley EFI / Fueltech PowerCore3 Pro Series Boost System w/ Keypad
Holley EFI / Fueltech PowerCore3 Pro Series Boost System w/ Keypad
RaceWire Solutions
Part #
HLL-EFI-FLT-BST1
UPC #
Regular price
$3,450.00 USD
Regular price
Sale price
$3,450.00 USD
Shipping calculated at checkout.
Quantity
Couldn't load pickup availability
Product Description
Product Description
**Change as of 7/1/23 - These Packages will no longer need build forms filled out as we are switching them to a pre-set circuit list to cut down on lead times and the endless customization that creates LONG lead times.
***Fully Customizable Package is still available with the optional pull downs, BUT with A LONG LEAD TIME
***After Making an Order, please use our Online Switch Panel and Control Panel Checklist forms (Only Applies to Custom Order Versions***)
RACEWIRE Solutions is proud to introduce a new line of Relay module units for drag race and street cars. The PowerCore3 system is capable of operating in high vibration environments such as drag racing, off-road, and strip/strip cars. These units use common plug-in fuses, relays and circuit breakers. These modules are designed for higher power outputs, and IP67 rated for moisture and sealing if the need is there.
The PowerCore3 - MSD Nitrous Series was based on one of our most popular systems - MSD Power Grid Carb/Nitrous Setups. This was designed around a customer who knows how to do their own electrical wiring, but wants everything included into one main system.
With this system, it is designed to operate a complete car with all of its components and accessories. Once you receive this system, you will route the separate bundles of wire to their specific locations based on the connector pin-out sheet I provide you for each output connector. Below is a list of included circuits in this PowerCore3 - MSD Nitrous Series. This package has an optional switch panel in the pull downs below.
PowerCore3 - EFI Nitrous Package Details: MSD/Carb Style Package Details:
-
PowerCore3 Module is 6" x 10"
-
23 Pin Deutsch Connector - Switch Panel Harness
-
14 Pin Deutsch Connector - MSD Integration Wiring
-
23 Pin Deutsch Connector - Nitrous Wiring
-
31 Pin Deutsch Connector - Main Outputs 1
-
23 Pin Deutsch Connector - Main Outputs 2
-
75 Amp Nitrous Relay (Inside Module)
-
15ft Wiring Harness for ALL Outputs
-
10ft Nitrous Wiring Harness
-
8ft Wiring Harness for MSD Integration Wiring
-
8ft - 6ga Red/Black Power Cables
-
This package has an optional switch panel in the pull downs below.
-
All systems are pre-tested before shipment to verify everything works as described.
-
All systems also come with a wiring pinout sheet showing where each wire goes, and what color wire it is.
Pre-Set - Non Customizable - Included Circuits:
-
Floating Ground Output Harness Included for All Circuits (Grounds for all components)
-
Water Pump
-
Engine Fan (Qty 2)
-
Trans Fan
-
Transbrake
-
Linelock
-
Starter "Solenoid" Activation Signal Wire (Integrated Thru Neutral Safety Switch)
-
Electric Shifter - MSD Activated (Aux use as well)
-
Brake Lights
-
Head Lights - Single Set Only (unless Combo Sw. Selected)
-
4 Corner Parking Lights
-
4 Corner Turn Signals w/ Integrated Brake Light Circuit (Optional)
-
MSD/Universal Ignition Integration Signal Wiring Inputs/Outputs from Control Panel
-
Racepak Dash Wiring if applicable
-
Optional Single Stage Nitrous system (No Progressive, Only Available on Full Custom)
-
Optional Nitrous System Wired for 4 Solenoids (2 fuel - 2 nitrous)
-
Optional Purge Solenoid
-
Optional 10ft Wiring harness for all solenoids
-
Optional WOT Switch Wiring
-
Optional Transbrake/WOT Interrupt
-
Transbrake Switch Wiring
-
Linelock Switch Wiring
-
Brake Switch Wiring
-
Neutral Safety Switch Wiring
-
Reverse Lights
-
1 Starter Bump button wiring
-
2 Spare Relay Circuits (12v Triggered)
-
2 Spare Each - Ignition and Battery Fused Circuit
-
Optional 4 Corner Turn Signals w/ Integrated Brake Light Circuit
