Skip to product information
1 of 1

Hushmat HushMat Marine Boat Complete Engine Cover and Transom Thermal Insulation and Deadener 75666

Hushmat HushMat Marine Boat Complete Engine Cover and Transom Thermal Insulation and Deadener 75666

HUSHMAT:

Part # HUSHMAT-75666
UPC # 00881101756665

Regular price $2,037.49 USD
Regular price $2,689.00 USD Sale price $2,037.49 USD
Sale Sold out
Shipping calculated at checkout.

Product Description

HushMat, manufacturer of the easiest to install and highest performance sound deadening materials available to the automotive and marine industries provides engine cover kits to fit your in-board. Recently a customer located in Fairbanks, Alaska, took delivery of a Habercraft Jetcraft 2175XS. The initial readings were 100 to 102 decibels (noise level similar to a rock concert). Engine and exhaust noise, the jet drive, fundamental vibrations generated by both transferred through the aluminum structure. Harmonics transmitted through the aluminum hull and consoles. The first order of business was to remove the stock sound insulation which consisted of foil faced and backed one half inch bubble wrap glued with contact cement to the inside of the doghouse. Because the engine, compressor, and exhaust emitted a substantial amount of sound in the mid to high frequency range, the use of one half inch HushMat Silencer High Frequency sound absorbing foam was applied over the Ultra Mat on the inside of the engines doghouse or cover. The foam was applied on the inside of the doghouse with the exception of surfaces directly adjacent to the exhaust. After the removal of the stock bubble wrap the customer picked up the doghouse and tapped it with a hammer. It rang like a bell. After the installation of the HushMat products it was dead silent, no vibration or resonance whatsoever. The sound levels after the doghouse deadening project produced readings of 95 to 96 decibels, compared to the presound dampened readings of 100 to 102 decibels a substantial noise reduction of 5 to 7 db. The next task covered the inside of the transom, bottom of the swim platform, and underside of the rear deck with Ultra Mat and were rewarded with an additional 2 to 3 decibels noise reduction, a reading of 92 to 94 decibels was achieved. The current noise level reduction has made the use of his boat much more pleasurable for my wife, friends, our dog, and myself.
  • GTIN: 00881101756665
  • Brand Name: Hushmat
  • Cold Flexibility: Can be bent around 25 mm. mandrel at -30 degrees C with no cracking or loss of adhesion
  • Color: Polymer - Black; Backing - Silver
  • Flammability: Tested per FMVSS 302, HushMat Ultra is self-extinguishing and meets all aspects of the standard
  • Hardness: 6.5 - 9.0mm ?ASTM D-5
  • Peel Strength: Tested in 90 degree peel at a crosshead speed of 300mm per minute on a 25 mm wide test specimen. Average load in Newtons is reported.
  • R-Value: 7
  • Safety: HushMat Ultra is not considered a hazardous material. Care should be used in handling to avoid cuts from the foil. Gloves are recommended. The Material Safety Data Sheet is available upon request and should be read and understood before using this product.
  • Shelf Life: At least 6 months when stored at 40 degrees C or less
  • Specific Gravity: 1.47 (approx. 0.47 pounds per square foot)
  • Temperature Resistance: HUSHMAT ULTRA will withstand a bake of 1 hour at 240 degrees C with no deformation, sag, or flow when baked in horizontal, vertical or inverted positions.
  • Thickness: 1.5mm
  • Country of Origin: United States
  • Emissions : Released
  • Life Cycle Status: Available To Order
  • Quantity of Each: 1
  • Package UOM: EA
  • Dimension: 26 x 14 x 3 inches
  • Weight: 80 lb
  • Milky Motorsports
View full details

Recently Viewed Products