M12x1.5 70mm Open-End Aluminum Lug Nuts 20pc Set w/ Key Blue
M12x1.5 70mm Open-End Aluminum Lug Nuts 20pc Set w/ Key Blue
K2 Industries
Part #
K2-5692-UNV-006-TSARK
UPC #
Couldn't load pickup availability
Product Description
Product Description
M12x1.5 70mm Open-End Aluminum Lug Nuts — 20-Piece Set with Key, Blue
Lightweight aluminum lug nuts with a matching key wrench and open-end design for fast wheel changes. These fit M12x1.5 studs and come in a full 20-piece set. Blue anodized finish resists corrosion.
Key Features
- Open-end design - No socket needed; use the included key or any 19mm wrench for quick removal and installation.
- Blue anodized finish - Protects against salt, moisture, and UV fade while adding visual consistency.
- 70mm overall length - Provides full engagement with standard and low-offset wheels without fouling.
Specs
- Material: Aluminum
- Thread: M12x1.5
- Overall Length: 70mm
- Configuration: Open-end
- Piece Count: 20
- Finish: Blue anodized
- Includes: Lug nuts and 19mm key wrench
What's Included
- 20x M12x1.5 aluminum lug nuts, blue anodized
- 19mm key wrench
Frequently Asked Questions
Will these fit my wheel studs?
These are M12x1.5 threads — measure your stud diameter and pitch to confirm before ordering. If you're unsure, check your vehicle's owner manual or contact a local shop to verify thread size.
Do I need to replace all 20 at once?
You get five sets of four in this pack, so it covers most four and five-lug vehicles with spares. If you run a single vehicle, you'll use four or five per wheel depending on lug count; the rest stay in your toolbox.
Can I use the key wrench to torque these down?
The key wrench is for removal and hand-tightening only. Use a calibrated torque wrench for final tightening — refer to your vehicle's service manual for the correct spec, typically between 80–120 ft-lbs for most applications.
