1 0

    PowerCore3 - Builder Series

    PowerCore3 - Builder Series

    RaceWire Solutions

    Part #
    sku-42308545511520
    UPC #

    $995.00 USD
    $995.00 USD
    Sale Sold out
    Shipping calculated at checkout.

    Product Description

    RACEWIRE Solutions is proud to introduce a new line of Short Lead Time, Stocking PowerCore3 Relay module units for drag race and street cars. The PowerCore3 system is capable of operating in high vibration environments such as drag racing, off-road, and strip/strip cars. These units use common plug-in fuses, relays and circuit breakers. These modules are designed for higher power outputs, and IP67 rated for moisture and sealing if the need is there.

    The PowerCore3 - Builder Series was based on one of our most popular Pro Series Boost Modules, but in a builder series for installers to set it up how they want with only a few pre-set circuits. This was designed around a customer who knows how to do their own electrical wiring, but wants everything included into one main system.  While most commonly used with a Holley EFI system, this can be used with any EFI system.

    Once you receive this system, you will route the separate bundles of wire to their specific locations based on the connector pin-out sheet I provide you for each output connector. 


    PowerCore3 - Builder Series Package Details:
    • The module is 6.25" by 11" and 5.5" tall
    • 23 Pin Deutsch Connector -  Switch Panel/Inputs #1
    • 14 Pin Deutsch Connector -EFI Integration Wiring Inputs #2
    • 31 Pin Deutsch Connector - Main Outputs 1
    • 31 Pin Deutsch Connector - Main Outputs 2
    • 75 Amp Fuel Pump Relay (Optional add on)
    • Optional Holley Solenoid Drivers
    • 15ft WIring Harness for ALL Outputs
    • 8ft Wiring Harness for EFI Integration Wiring
    • 8ft - 6ga Red/Black Power Cables
    • All systems are pre-tested before shipment to verify everything works as described.
    • All systems also come with a wiring pinout sheet showing what every terminal screw does, where it goes, and what color wire it is.  
    Pre-Set - Non Customizable - Included Circuits:
    • Starter
    • Ignition
    • Head Lights - Single Set Only
    • Qty 6 - 35A Relays (12V Triggered)
    • Qty 6 - 35A Relays (GND Triggered)
    • Qty 2 - 20A Relays (12V Triggered)
    • Qty 2 - 20A Relays (GND Triggered)
    • Qty 4 - Battery Fused Circuits
    • Qty 4 - Ignition Fused Circuits
    • Solid State Relays - Up to 4 Available
    • Starter "Solenoid" Activation Signal Wire (Integrated Thru Neutral Safety Switch)
    • Holley EFI Integration Signal Wiring Inputs/Outputs to Holley from Control Panel
    • Holley EFI Dash / Racepak Dash Wiring
    View full details

    Recently Viewed Products