Hushmat Quiet Tape Shop Roll - One 1inx20'x1mm Single Side Foam Tape ea 30300

• GTIN: 00881101303005
• Brand Name: Hushmat
• Adhesion Characteristics: Rated from -40 to 300 Degrees F. When subjected to a 90 degree peel at a rate of 12 in/min (300 mm/min), the material has strength greater than 5 lbs (22.2 N) after the following: 5 min dwell, 2 weeks at 70 C, 2 weeks 100% relative humidity 37.8 C, 3 week environmental cycle
• Color: Elastomer - Dark Brown; Films - Release coated paper
• Dead Load: The material will show no evidence of saggin or pulling away from panel when a 34 gram weight is attached to (25 x 150 mm) strip with the assembly hanging vertically for 24 hours.
• Flammability: F/C MVSS 302
• Flexibility/Conformability: The material will remain flexible and conformable at temperatures as low as -30 degrees C
• Mold Resistance: No odor or mold development was evident after 2 weeks at 100% relative humidity/37.8 C minimum
• Performance Requirements: The material remains tacky, shall not harden appreciably, no leach oils, and shall have good adhesion to fabrics and primed, lacquered, and trim adhesive sprayed surfaces. Tape strip will not stretch or have laminate separate upon removal of release paper.
• Repositionability: The material can be repositioned and reused multiple times and still meet above adhesion characteristics.
• Safety: Quiet Tape is not considered a hazardous material
• Shelf Life: 12 months at 35 degrees C minimum
• Solid Content: 98% minimum by weight
• Specific Gravity: .45 typical
• Stain/Transfer Resistance: Under normal operating conditions, this material will not stain or transfer when put in contact with other trim shop materials.

• Country of Origin: United States
• Emissions : Released
• Life Cycle Status: Available To Order

• Quantity of Each: 1
• Package UOM: EA
• Dimension: 6 x 6 x 1 inches
• Weight: 0.3 lb

PDF:

HushMat Quiet Tape Specification Sheet

Damping Pad MSDS

install_eng_spanish