Silicone Hose 3-Ply 1.50" to 2.00" Reducer with 90 Degree - Black
Silicone Hose 3-Ply 1.50" to 2.00" Reducer with 90 Degree - Black
K2 Industries
Part #
K2-1411-UNV-006-TSARK
UPC #
Couldn't load pickup availability
Product Description
Product Description
Silicone Hose 3-Ply 1.50" to 2.00" Reducer with 90 Degree — Black
Step down your coolant or intake charge air with a 90-degree silicone reducer built to handle heat and pressure. Three-ply construction resists collapse and degradation in high-temperature environments. The black finish blends into engine bays while the tapered 1.50" to 2.00" bore handles mid-range flow transitions smoothly.
Key Features
- 1.50" to 2.00" Tapered Bore - Allows you to step between different hose sizes without adapters or reducers stacked in series.
- 90-Degree Configuration - Routes hose runs where 180-degree straight reducers won't fit, saving space in tight engine bays.
- Black Silicone - Rated for coolant and intercooler setups; resists UV, ozone, and thermal cycling without cracking.
Specs
- Material: Silicone (3-Ply)
- Configuration: 90-Degree Reducer
- Inlet: 1.50"
- Outlet: 2.00"
- Color: Black
Whats Included
- 1x Silicone Hose Reducer (90-Degree, 1.50" to 2.00")
Frequently Asked Questions
Will this work with both coolant and turbo boost lines?
This hose is rated for coolant systems and intercooler charge air. If you're running it on a turbo intake or boost circuit, confirm your system pressure rating first—most silicone hoses handle boost up to 25–30 psi, but check your setup specs to be safe.
Do I need clamps, or does this come with them?
Clamps are not included. You'll need two hose clamps—one for the 1.50" inlet side and one for the 2.00" outlet side. Pick a clamp size that matches your hose diameter and tighten firmly to prevent weeping.
Can I use this right out of the box, or do I need to prep it first?
This hose is ready to use. Rinse the interior with clean water if you want to remove any manufacturing residue, then dry it before connecting. No sandpaper, primer, or adhesive prep needed.
