1 2

SMG ULTIMATE Slave Cylinder & Throwout Bearing Clutch Accessory Package for 2010-2015 Camaro SS, 1LE & Z28 AND MORE

SMG ULTIMATE Slave Cylinder & Throwout Bearing Clutch Accessory Package for 2010-2015 Camaro SS, 1LE & Z28 AND MORE

SMGspeed

Part #
SMGULTCLUTCHACCY-5G
UPC #

$556.49 USD
$556.49 USD
Sale Sold out
Shipping calculated at checkout.

Product Description

SMG Has put together the ultimate Clutch Accy package to replace that worn out old Stock GM Slave Cylinder. Our proven kits include: A new direct fit upgraded slave cylinder, with 10% larger Throw out bearing and support and a brand new large style GM Pilot Bearing.
The larger support leads to a greater and more stable engagement. Which provides a smoother clutch feel as well as performance.

Bleeding Your Hydraulic Bearing

When bleeding your hydraulic bearing, you want to make sure your Master Cylinder has been bench bled; this will ensure that you don’t have air trapped.

Now you are ready to bleed the bearing. Get a clear drinking cup or plastic water bottle with the top 1/3 cut off. Fill the bottle ½ full with brake fluid. Open the bleeder valve 2 or 3 turns and completely submerge the valve fitting into brake fluid. (Do NOT use an extension hose to reach the bottle. Air will enter around the threads of the valve.) Now have someone push the pedal completely down to the floor quickly, pause, then release the pedal slowly back up and wait for 5 seconds to replenish the fluid. (As you push the pedal, air bubbles will escape and as the pedal is released, it will suck brake fluid back to the bearing.) Repeat this until you no longer see bubbles.

Now, with your index finger and thumb, reach into the bottle, while keeping the fitting submerged, and tighten the valve with your fingers. Remove the bleeder valve from the bottle and finish tightening the valve with a wrench.

View full details

Recently Viewed Products