Universal 3.00" Aluminum Intercooler Piping Kit 8PC 90 Degree
Universal 3.00" Aluminum Intercooler Piping Kit 8PC 90 Degree
K2 Industries
Part #
K2-4367-UNV-006-TSARK
UPC #
Couldn't load pickup availability
Product Description
Product Description
Universal 3.00" Aluminum Intercooler Piping Kit — 8 Piece 90 Degree Elbows
Eight 90-degree aluminum pipe segments in 3.00" diameter for custom intercooler plumbing runs. Aluminum construction handles boost pressure without flex. Universal sizing means you cut and fit to your exact layout—no pre-bent geometry forcing you into wrong angles.
Key Features
- 3.00" Bore - Standard intercooler outlet size; matches most turbo kit piping without reducers
- 90-Degree Elbows - Pre-angled segments save fabrication time and keep bends consistent
- Aluminum Construction - Lightweight, corrosion-resistant, won't dent under normal pressure cycles
Specs
- Material: Aluminum
- Configuration: Eight 90-degree elbows
- Bore: 3.00"
- Condition: New
What's Included
- Eight 3.00" aluminum 90-degree pipe segments
Frequently Asked Questions
Do these need clamps or other hardware to seal?
These are pipe segments only—no internal seal or coupling hardware included. You'll need clamps, T-bolt clamps, or welding to join them to your existing piping and intercooler ports. Confirm your connection method before ordering.
Can I cut these down if I need a shorter run?
Yes. Aluminum cuts cleanly with a saw or band saw. Deburr the inside edge after cutting to prevent sharp edges from catching coolant flow.
What if I need different angles besides 90 degrees?
This kit is 90-degree elbows only. For 45-degree or 135-degree bends, you'll need to source those separately or have custom segments fabricated.
